Front Safari Windows

Front Safari Windows

Safaris let those warm, palmy breezes blow through your bus. Kits come complete with glass, seals and all necessary mounting hardware. The latch tabs easily screws into the dash, but we suggest you weld in... Click here for more information


Cam Followers (Stock Lifters) (Type 6)

These ride against the cam. We prefer the Mahle or Scat brand for the upright engines. We personally have had bad luck with regrinds. If you are going to use used ones, clean the head surfaces and put two together with the faces touching. Hold them up to a light to see if you can see light between them increasing from the middle out. In other words the heads should be convex not concave or flat. Note: When installing, make sure your cam has .060 to .100" clearance from the top of the cam lobe to the lifter. Install using cam assembly lube.

Cam Followers (Stock Lifters)
Add to cart

Each

40hp-1600

These ride against the cam. We prefer the Mahle or Scat brand for the upright engines. We personally have had bad luck with regrinds. If you are going to use used ones, clean the head surfaces and put two together with the faces touching. Hold them up to a light to see if you can see light between them increasing from the middle out. In other words the heads should be convex not concave or flat. Note: When installing, make sure your cam has .060 to .100" clearance from the top of the cam lobe to the lifter. Install using cam assembly lube.
113 109 309C: $9.95