New Crankcase

New Crankcase

We only carry new dual relief cases. These cases are far superior to the old single relief cases. The oil galley of the dual relief case is twice as big in diameter and there's more... Click here for more information


Cylinder Head Nuts And Washers (Type 6)

These nuts and washers hold the heads on. The washers are thick so they won't deform under heat and torque. The torque on 10mm nuts is 28 ft. lb. and the 8mm nuts is 18 ft.lb. One trick is to use 3M glue on the bottom of the washers in the rocker area to prevent leaking through the head.

Cylinder Head Nuts And Washers
Add to cart

8mm washer

These nuts and washers hold the heads on. The washers are thick so they won't deform under heat and torque. The torque on 10mm nuts is 28 ft. lb. and the 8mm nuts is 18 ft.lb. One trick is to use 3M glue on the bottom of the washers in the rocker area to prevent leaking through the head.
N154011: $0.30

 

Cylinder Head Nuts And Washers
Add to cart

8mm nut

These nuts and washers hold the heads on. The washers are thick so they won't deform under heat and torque. The torque on 10mm nuts is 28 ft. lb. and the 8mm nuts is 18 ft.lb. One trick is to use 3M glue on the bottom of the washers in the rocker area to prevent leaking through the head.
043 101 457: $0.50

 

Cylinder Head Nuts And Washers
Add to cart

10mm nut

These nuts and washers hold the heads on. The washers are thick so they won't deform under heat and torque. The torque on 10mm nuts is 28 ft. lb. and the 8mm nuts is 18 ft.lb. One trick is to use 3M glue on the bottom of the washers in the rocker area to prevent leaking through the head.
021 101 457: $0.50

 

Cylinder Head Nuts And Washers
Add to cart

10mm washer

These nuts and washers hold the heads on. The washers are thick so they won't deform under heat and torque. The torque on 10mm nuts is 28 ft. lb. and the 8mm nuts is 18 ft.lb. One trick is to use 3M glue on the bottom of the washers in the rocker area to prevent leaking through the head.
111 101 461: $0.36