Chrome Scripts

Chrome Scripts

These aftermarket scripts easily attach to your hood or anywhere else you choose to put them.... Click here for more information


Distributor Drive (Type 6)

This gear matches up with the brass gear that is on the crank. Please read CRANK DISTRIBUTOR DRIVE GEAR for more info. We put this gear in before we put the case halves together. To do this, install the gear into the case with the two shims. Then install the distributor and bolt it down. Press up on the distributor drive gear and measure the endplay. You should have around .010" of play. If you have a lot more than that, add some shims until you get close. Once you've done that, align the clips of the distributor parallel to the cylinder and tighten your pinch clamp so the body of the distributor doesn't move. Now point the rotor of the distributor to the hash mark on the distributor body where the #1 cylinder would fire. Don't move anything from this point. Grab your crank by the #1 rod and set it down in the case and you will be in time.

Distributor Drive
Add to cart

Drive

40hp-1600

This gear matches up with the brass gear that is on the crank. Please read CRANK DISTRIBUTOR DRIVE GEAR for more info. We put this gear in before we put the case halves together. To do this, install the gear into the case with the two shims. Then install the distributor and bolt it down. Press up on the distributor drive gear and measure the endplay. You should have around .010" of play. If you have a lot more than that, add some shims until you get close. Once you've done that, align the clips of the distributor parallel to the cylinder and tighten your pinch clamp so the body of the distributor doesn't move. Now point the rotor of the distributor to the hash mark on the distributor body where the #1 cylinder would fire. Don't move anything from this point. Grab your crank by the #1 rod and set it down in the case and you will be in time.
113 105 231B: $49.95

 

Distributor Drive
Add to cart

Spring

All

This gear matches up with the brass gear that is on the crank. Please read CRANK DISTRIBUTOR DRIVE GEAR for more info. We put this gear in before we put the case halves together. To do this, install the gear into the case with the two shims. Then install the distributor and bolt it down. Press up on the distributor drive gear and measure the endplay. You should have around .010" of play. If you have a lot more than that, add some shims until you get close. Once you've done that, align the clips of the distributor parallel to the cylinder and tighten your pinch clamp so the body of the distributor doesn't move. Now point the rotor of the distributor to the hash mark on the distributor body where the #1 cylinder would fire. Don't move anything from this point. Grab your crank by the #1 rod and set it down in the case and you will be in time.
111 105 233: $1.95