Chrome Scripts

Chrome Scripts

These aftermarket scripts easily attach to your hood or anywhere else you choose to put them.... Click here for more information


Front Bearing Nut Lock Plate (Type 6)

This plate goes between the two nuts on each of the front spindles. It is bent to lock the nuts keeping them from spinning. Install the first nut, the plate, and then the outer nut. Tighten the outer nut against the plate making sure you don't spin the inner nut. Use a large pair of channel locks to bend one tab against the inner nut and the remaining tab against the outer nut. Note: This plate should be replaced every time you pull the drum off.

Front Bearing Nut Lock Plate
Add to cart

-65

This plate goes between the two nuts on each of the front spindles. It is bent to lock the nuts keeping them from spinning. Install the first nut, the plate, and then the outer nut. Tighten the outer nut against the plate making sure you don't spin the inner nut. Use a large pair of channel locks to bend one tab against the inner nut and the remaining tab against the outer nut. Note: This plate should be replaced every time you pull the drum off.
111 405 681: $1.25